Modern 350° Rotatable LED Wall Sconce – Adjustable Directional Wall Light for Living Room & Bedroom

Installation Type: Wall Mount (Hardwired)

1. Switch off the circuit breaker controlling the installation location before starting.

2. Position the mounting plate against the wall at your desired height and mark the screw holes. Use a level to ensure the plate is straight.

3. Drill holes at the marked positions and insert appropriate wall anchors for your wall type (drywall, brick, or concrete).

4. Fasten the mounting plate securely to the wall using the included screws.

5. Connect the fixture wires to the supply wires — live (black/brown) to live, neutral (white/blue) to neutral, ground (green/yellow) to ground. Secure with wire nuts.

6. Attach the sconce body to the mounting plate and tighten the set screws.

7. Restore power and test the light. Rotate the head up to 350° to set your preferred beam direction.

Tip: For bedside reading, mount at 50–60 inches from the floor and angle the beam toward your reading position.

Metal Body Care: Dust the fixture regularly with a soft, dry cloth. For the matte finish, use a slightly damp microfiber cloth with mild soap if needed, then dry immediately.

LED Lens Cleaning: Wipe the LED lens with a soft lint-free cloth. Avoid abrasive materials that could scratch the lens and reduce light output.

Rotation Mechanism: The 350° swivel joint is designed for smooth, tool-free adjustment. Do not force past the rotation limit. If resistance increases over time, a small amount of silicone-based lubricant on the joint can restore smooth movement.

Electrical Safety: Always switch off power at the breaker before cleaning or inspecting. Never spray liquids directly onto electrical components.

Long-Term Maintenance: Integrated LEDs are rated for 30,000+ hours. If you notice dimming or flickering, have a qualified electrician inspect the LED driver.