Modern Glass E14 Chandelier with 6, 8 or 10 Lights for Living Rooms & Halls

Installation Type: Chain Pendant Mount (Ceiling)

1. Turn off electricity at the circuit breaker. Confirm with a voltage tester before proceeding.

2. Install the ceiling canopy bracket to the junction box using the included screws and anchors.

3. Assemble the chandelier frame by attaching each arm to the central hub according to the included diagram. For 8 and 10-light models, work on a flat padded surface to prevent glass damage.

4. Carefully attach the glass globe shades to each arm. Handle by the metal collar, not the glass body.

5. Thread the wiring through the chain and connect to the ceiling supply — live to live, neutral to neutral, ground to ground.

6. Hang the assembled chandelier from the chain, adjust to your desired drop height, and secure the canopy cover.

7. Install the included E14 LED bulbs into each socket. Restore power and test.

Clean the glass globes with a soft lint-free cloth dampened with warm water and a drop of mild dish soap. Dry immediately with a separate cloth to prevent water spots.

Dust the iron frame with a dry microfiber cloth. For fingerprints or smudges on the metal, use a slightly damp cloth and dry thoroughly to prevent oxidation.

Replace E14 LED bulbs as needed. Always turn off power and allow bulbs to cool before handling.

Inspect the chain and hanging hardware periodically to ensure secure suspension, particularly after initial installation.

Avoid using ammonia-based glass cleaners on colored glass shades (smoke grey, amber) as these may affect the tinted finish over time.