Installation Type: Hardwired Wall Mount (90–260 V AC)

1. Turn off the circuit breaker for the installation location. Verify power is off with a voltage tester.

2. Position the mounting bracket on the wall at the desired height and mark the screw hole locations.

3. Drill holes, insert wall anchors, and fasten the bracket securely with the included screws.

4. Connect the fixture wires to the mains wires: live to live, neutral to neutral, and ground to ground. Secure each connection with wire nuts.

5. Attach the sconce body to the bracket, ensuring it is level and the up-and-down light apertures are oriented correctly (vertically).

6. Restore power and test both the upward and downward beams. Professional installation is recommended for multi-unit corridors or unfamiliar wiring.

Wipe the brushed aluminum body with a soft, dry cloth to remove dust. For fingerprints, use a lightly damp cloth and dry immediately to maintain the brushed finish.

Clear the up-and-down light apertures of dust or debris that could cast shadows or reduce beam clarity.

Avoid abrasive cleaners, scouring pads, or chemical solvents on the aluminum surface.

Turn off power before cleaning. The LED is integrated and requires no bulb replacement under normal use.

Check the wall mount screws once a year, especially if the fixture is in a high-traffic hallway subject to vibration.